ndoo.sg

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Building Meshtastic Firmware on Windows Subsystem for Linux (WSL) ======

I needed to build Meshtastic firmware on WSL in order to produce binary UF2 firmware for the [[https://github.com/meshtastic/firmware/tree/master/variants/xiao_ble|Meshtastic XIAO BLE variant]].

Here's what I had to do.

===== Prepare Debian Environment =====

  - Install [[https://www.microsoft.com/store/productId/9MSVKQC78PK6|Debian from the Microsoft Store]]
  - Open and set up user
  - <code>sudo apt-get install git python3-venv</code>
  - <code>curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py 
python3 get-platformio.py</code>

===== Prepare Meshtastic Firmware Build Environment =====

  - <code>git clone https://github.com/meshtastic/firmware.git meshtastic-firmware && cd meshtastic-firmware</code>
  - Optional: check out a tagged release\\ <code>git checkout tags/v2.3.8.d490a33</code>
  - <code>./variants/xiao_ble/xiao_ble.sh</code>

===== Build the Firmware =====

  - <code>pio run -e xiao_ble</code>
  - <code>./bin/uf2conv.py .pio/build/xiao_ble/firmware.hex -c -o firmware.uf2 -f 0xADA52840</code>
  - <code>cp firmware.uf2 /mnt/c/Users/YOUR_WINDOWS_USERNAME/Desktop/</code>

===== Upload the Firmware =====

  - Connect the XIAO BLE to the computer USB and double tap the reset button, the red LED will breathe and a USB drive "XIAO-BOOT" will be mounted
  - Copy firmware.uf2 from your desktop to the USB drive
ndoo.sg

User Tools

Site Tools

Page Tools
