Differences

This shows you the differences between two versions of the page.

--- projects:homelab:clearfog_cx_lx2:build_uefi [2024/10/01 14:37] – [Steps] fix nowiki sequence Andrew Yong
+++ projects:homelab:clearfog_cx_lx2:build_uefi [2024/10/01 16:47] (current) – [Valid Speed Settings] Andrew Yong
@@ Line 16: / Line 16: @@
 ===== Valid Speed Settings =====
-  * **SOC_SPEED: 600 to 2200 (MHz) in 100 MHz increments**
+  * **SOC_SPEED: 600 to 2200 (MHz) in 100 MHz increments** (default: 2000 MHz)
     * //CGA_PLL1_RAT = CGA_PLL1_RAT = SOC_SPEED / 100//
-  * **BUS_SPEED: 550 to 800 (MHz) in 100 MHz increments**, except 600 MHz
+  * **BUS_SPEED: 550 to 800 (MHz) in 100 MHz increments**, except 600 MHz (default: 700 MHz)
     * //SYS_PLL_RAT = 2 * BUS_SPEED / 100 - 1//
     * //0b01011 - 11:1 - is a reserved value//
@@ Line 26: / Line 26: @@
 - //QorIQ LX2160A Reference Manual, 4.9.8.9 Reset Control Word (RCW) Register Descriptions.//
+==== Anecdotal Tips ====
+  * Overclocking SOC_SPEED = 2200 MHz is stable for most LX2160A; even higher speeds can be set but will be unstable
+  * Overclocking BUS_SPEED = 800 MHz caused core lockups on heavy PCIe load for me
 ===== Other Build Options =====

ndoo.sg