ndoo.sg

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== OpenZFS Notes ======

===== Building OpenZFS on Fedora =====

  - ''%%sudo dnf install --skip-broken gcc make autoconf automake libtool rpm-build libtirpc-devel libblkid-devel libuuid-devel libudev-devel openssl-devel zlib-devel libaio-devel libattr-devel elfutils-libelf-devel kernel-devel-$(uname -r) python3 python3-devel python3-setuptools python3-cffi libffi-devel git ncompress libcurl-devel python3-packaging dkms createrepo%%''
  - ''%%git clone https://github.com/openzfs/zfs.git --branch zfs-2.3.0-rc4 --single-branch --depth=1%%''
  - ''cd ./zfs''
  - ''./autogen.sh''
  - ''./configure''
  - ''make rpm rpm-dkms''
  - ''createrepo .''
  - ''cat %%<<%% EOF | sudo tee /etc/yum.repos.d/zfs-local.repo\\ [zfs-local]\\ name=ZFS on Linux for Fedora $releasever Local\\ baseurl=%%file://$(pwd)%%\\ enabled=1\\ EOF''
  - ''%%sudo dnf upgrade --refresh --nogpgcheck zfs zfs-dkms%%''

==== Back to Official OpenZFS Releases ====

  - [[https://openzfs.github.io/openzfs-docs/Getting%20Started/Fedora/index.html#installation|Getting Started / Fedora / Installation]]
  - ''%%sudo dnf upgrade --refresh zfs zfs-dkms%%''
  - ''sudo rm /etc/yum.repos.d/zfs-local.repo''
===== Adding Hardware 512e SSDs to 512e/4kn zpool =====

If you're trying to add a (generally older or SATA) SSD to a zpool, you may come across this error:

> ''$ sudo zpool add //tank// log mirror //ssd1 ssd2//''
> ''cannot add to '//tank//': adding devices with different physical sector sizes is not allowed''

This is because the existing zpool was created with 4k sector drives, causing ZFS to detect and set ashift = 12 (2^ashift = 4096), and new devices being added to the zpool must have consistent physical sector sizes.

Below are some pre-checks that should be done before continuing to add the SSD(s), and how to override the newly detected inconsistent ashift value.

  - Verify physical sector size of your drives:\\ ''lsblk -do+LOG-SEC,PHY-SEC''
    * 4kb sector drive with 512e enabled: LOG-SEC = 512, PHY-SEC = 4096
    * 4kb sector drive without 512e enabled: LOG-SEC = 4096, PHY-SEC = 4096
    * 4k/8k/16kb sector SSD with hardware 512e: LOG-SEC = 512, PHY-SEC = 512
    * 512b drive: LOG-SEC = 512, PHY-SEC = 512
  - Verify [[https://openzfs.github.io/openzfs-docs/Performance%20and%20Tuning/Workload%20Tuning.html#alignment-shift-ashift|ashift value]] of zpool(s):\\ ''%%zdb -C | grep "ashift\| name:"%%''\\ //Smallest possible IO = 2^ashift//
    * 4096: ashift = 12
    * 512: ashift = 9
  - Look at your SSD datasheet to confirm physical sector size ≥ 4096 (if you can't find this information, we will just have to assume it is a multiple of 4k)
  - Specify the same ashift value as the existing pool when adding the SSD(s):\\ ''sudo zpool add -o ashift=12 //tank// log mirror //ssd1 ssd2//''
  - Verify command succeeded:\\ ''%%zpool list -v && zdb -C | grep "ashift\| name:"%%''
ndoo.sg

User Tools

Site Tools

Page Tools
