Differences

This shows you the differences between two versions of the page.

--- projects:amateur_radio:tinygs [2024/05/14 18:57] – created Andrew Yong
+++ projects:amateur_radio:tinygs [2024/06/01 12:55] (current) – Add initial setup steps Andrew Yong
@@ Line 10: / Line 10: @@
   * LNA: [[https://item.taobao.com/item.htm?id=775926311040&skuId=5322051256398|HTOOL HT004A (Taobao)]] 100 kHz to 6 GHz, +30 dB gain low noise high impedance amplifier
   * Feedline: [[https://item.taobao.com/item.htm?id=775926311040&skuId=5499100670669|SMA male to male 30cm (Taobao)]]
+===== Initial Setup (LILYGO LoRa32) =====
+==== Prerequisites ====
+  * ''MQTT_USER'' and ''MQTT_PASS'' by sending ''/mqtt'' to [[https://t.me/tinygs_personal_bot|@tinygs_personal_bot]] on Telegram
+  * ''LATITUDE'' and ''LONGITUDE'' of your TinyGS, you can look it up with the [[https://developers.google.com/maps/documentation/geocoding/overview#how-the-geocoding-api-works|Google Geocoding API]] demo
+==== Setup Steps ====
+  - Connect SMA antenna to LoRa32
+  - Connect LoRa32 to USB power and wait ~5 seconds for board to boot
+  - Connect computer or phone to //My TinyGS// Wi-Fi network
+  - Open web page [[http://192.168.4.1|192.168.4.1]]
+  - Configure the following basic parameters:
+    * GroundStation Name
+    * GroundStation Password for this dashboard
+    * Time Zone
+    * Latitude and Longitude: refer to [[#prerequisites|prerequisites]]
+    * MQTT Server address and Server Port: leave unchanged
+    * MQTT Username and MQTT Password: refer to [[#prerequisites|prerequisites]]
+    * Board type: ''433MHz LILYGO T3_V1.6.1''
+    * OLED Bright: I recommend setting to 1 to prolong OLED life; set to 0 to turn off
+    * Enable TX: Disable
+      * Only enable if you are a licensed radio amateur and have no LNA in the path

ndoo.sg

User Tools

Site Tools

Differences

Page Tools