These are enclosures I have built, bought or printed that I particulary enjoyed and recommend; or notes about interesting enclosure options I am exploring.

• Deenlai FSH710

I haven't built any enclosures yet, but here are some useful enclosures to consider for DIY:

• 1010 Micro Case - internal dimensions 111 mm × 73 mm × 43 mm
• 1015 Micro Case - internal dimensions 131 mm × 67 mm × 35 mm
• 1020 Micro Case - internal dimensions 135 mm × 90 mm × 43 mm

• 德恩莱 (Deenlai) FSH710/2P-0 - “IP66”, internal dimensions 46 mm × 34 mm × 25mm¹⁾
• 德恩莱 (Deenlai) FSH713/2P-0 - “IP68”, internal dimensions 72 mm × 49 mm × 32 mm

• Search for 瓶胚 on Taobao

Heltec WiFi LoRa 32(V3) with Plastic Shell

• No battery compartment, no support for SMA connector; 3D printed replacement backs available to add battery and other compartments
• IMHO, better to just order the board without the case, you get a u.FL to SMA pigtail and SMA antenna, which gives you an upgrade path

Unify Enclosure Solar IP65 100x75x38

• The solar panel is not sufficient to keep a RAK4361 Meshtastic ROUTER_CLIENT charged, even with half a day of direct sunlight

I recommend printing in PETG or similar heat-resistant materials, as the combined heat of the microcontroller, LoRa module and environment may be enough to soften PLA

• Accessory compartment → Space inside case for additional accessories e.g. GPS module or sensors
• Easy print → Prints without supports

If your device is not on the list of enclosures I have built and tested, or you just want to look at the variety of designs available, these links can help you find more enclosures:

• TonyG on Printables.com
• Alley Cat on Printables.com
• Also look on Printables.com, Thingiverse or try a Yeggi search
• Commercial enclosures can be found at the Printables.com store (3D models) or Etsy (pre-built Meshtastic enclosures and devices)

Heltec V3 Case H1 Minimal + Extra space for screen

• Battery compartment: Yes (prismatic 803048 or 103048)
• Accessory compartment: None
• Antenna: SMA (≤10 mm)
• Assembly: Snap fit, optional M3x12 screw
• Easy print: Yes
• Minimalist and de-branded remix of H1 - Case for Heltec V3 running Meshtastic

Pocketed Heltec V3 OLED LoRa Case, V2

• Battery compartment: Yes (prismatic 103450)
• Accessory compartment: Yes
• Antenna: SMA
• Assembly: Snap fit
• Easy print: Yes

Heltec Wiresless Paper LoRa Case (specifically, the external antenna version is the one I like)

• Battery compartment: Yes (prismatic 803048)
• Accessory compartment: Yes
• Antenna: SMA
• Assembly: Snap fit
• Easy print: Yes

Heltec Wireless Stick Lite V3 basic case

• Battery compartment: No
• Accessory compartment: No
• Antenna: SMA
• Assembly: Snap fit
• Easy print: Yes
  • The buttons are very small and may melt if printed as individual objects, I recommend printing them with other objects

LILYGO T3-S3 v1.2 Slimline Case with Button

• Battery compartment: None
• Accessory compartment: None
• Antenna: SMA (≤13 mm)
• Assembly: Snap fit
• Easy print: Yes
• My remix of TTGO Lora32 T3 Slimline Case and TTGO Lora32 T3-S3 Slimline Case - (USB C version)

TTGO LoRa32 v2.1.1.6 *and* T3S3 cases for Meshtastic

• Battery compartment: Yes (cylindrical 18650 or prismatic 703048)
• Accessory compartment: None
• Antenna: SMA (≤13 mm)
• Assembly: 4× M3x18 socket head cap screws + 4× M3 nuts
• Easy print: No

TTGO T-Beam V1.1 NEO-6M (Meshtastic) Case

• Battery compartment: Yes (cylindrical 18650)
• Accessory compartment: None
• Antenna: SMA
• Assembly: Snap fit
• Easy print: Yes

T-Beam SUPREME Case

• Battery compartment: Yes (cylindrical 18650)
• Accessory compartment: None
• Antenna: SMA (≤10 mm or ≤13 mm)
• Assembly: 2× M3x8 socket head cap screws + 2× M3 nuts
• Easy print: Yes