Work
Projects- 3D Printing Projects
- Amateur Radio
- Automotive Projects
- Electronics Projects
- Homelab Projects
- Horticulture Projects
- Other Projects
- Project Projects
- Software Projects
- Tumblr (photography)
-
Work
Projects
Most of my component recommendations are in Buyer's Guide.
STM32WLEx product page; note that this MCU has an integrated Semtech SX1262.
Meshtastic firmware support is still WIP (booting and functional, but no writeable configuration storage); see [Board]: STM32WL (Seeed Studio Wio-E5) #2539
Note: Meshtastic only supports modules with SPI connectivity; UART modules are not supported.
Module | E22-900M22S | E22-900M30S | E22-900M33S |
---|---|---|---|
LoRa IC | Semtech SX1262 | ||
Maximum Tx Power | 22 dBm | 30 dBm | 33 dBm |
PA RFIC | N/A | Innotion YP2233W | Cemax ZDH1061 |
PA Gain | N/A | 7 dB | 25 dB |
SX126X_MAX_POWER | 22 dBm | 22 dBm | 9 dBm |
LNA RFIC | N/A | NXP BFU520 | |
LNA Gain | N/A | 18 dB | 18 dB |
Rx Sensitivity (Datasheet) | -146 dBm | -150 dBm | -135 dBm |
TXCO | YL 9S32000054 |