Work
Projects- 3D Printing Projects
- Amateur Radio
- Automotive Projects
- Electronics Projects
- Gaming Projects
- Homelab Projects
- Horticulture Projects
- Other Projects
- Project Projects
- Software Projects
- Tumblr (photography)
-
Sidebar
projects:automotive:kancil:k4_660_upgrades:radio
Table of Contents
Upgrading Perodua Kancil K4 660 Radio
Wiring Harness
| Function | Kancil | ISO (2 × 8-pin) | ISO (16-pin) | |||
|---|---|---|---|---|---|---|
| Pin Number | Car Harness | Radio/Clock Harness | 8-pin Power | 8-pin Speaker | ||
| B+ (Battery Positive) | OG (Orange) - shared with clock | YE (Yellow) | YE (Yellow) | |||
| ACC/IG (Accessory/Ignition) | RD (Red) - shared with clock | RD (Red) | RD (Red) | |||
| GND (Ground) | 10 | BK (Black) | BK (Black) - shared with clock | BK (Black) | BK (Black) | |
| ILL (Illumination/Dimmer) | BN (Brown) - only wired to clock1) | OG (Orange) | OG (Orange) | |||
| Remote | NC (Not Connected) | BU (Blue) | BU (Blue) | |||
| LR- | Light BN/YE (Light Brown/Yellow stripe) | GN/BK (Green/Black stripe) | GN/BK (Green/Black stripe) | |||
| LR+ | Light BN (Light Brown) | GN (Green) | GN (Green) | |||
| RR- | BU/WH (Blue/White stripe) | VT/BK (Violet/Black stripe) | VT/BK (Violet/Black stripe) | |||
| RR+ | BU (Blue) | VT (Violet) | VT (Violet) | |||
| LF- | NC for Kancil 660 | WH/BK (White/Black stripe) | ||||
| LF+ | NC for Kancil 660 | WH | ||||
| RF- | NC for Kancil 660 | GY/BK (Grey/Black stripe) | ||||
| RF+ | NC for Kancil 660 | GY (Grey) | ||||
Connector Pin Numbering
| 1 | 2 | 3 | Latch | 4 | 5 | |
| 6 | 7 | 8 | 9 | 10 (GND) | 11 | 12 |
1)
Need to splice/tap this wire to enable automatic radio illumination
projects/automotive/kancil/k4_660_upgrades/radio.txt · Last modified: by Andrew Yong
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
