1. sudo dnf install --skip-broken gcc make autoconf automake libtool rpm-build libtirpc-devel libblkid-devel libuuid-devel libudev-devel openssl-devel zlib-devel libaio-devel libattr-devel elfutils-libelf-devel kernel-devel-$(uname -r) python3 python3-devel python3-setuptools python3-cffi libffi-devel git ncompress libcurl-devel python3-packaging dkms createrepo
2. git clone https://github.com/openzfs/zfs.git --branch zfs-2.3.0-rc1 --single-branch --depth=1
3. cd ./zfs
4. ./autogen.sh
5. ./configure
6. make rpm rpm-dkms
7. createrepo .
8. cat << EOF | sudo tee /etc/yum.repos.d/zfs-local.repo
[zfs-local]
name=ZFS on Linux for Fedora $releasever Local
baseurl=file:///path/to/git/zfs
enabled=1
EOF
9. sudo dnf upgrade --refresh --nogpgcheck zfs zfs-dkms

If you're trying to add a (generally older or SATA) SSD to a zpool, you may come across this error:

$ sudo zpool add tank log mirror ssd1 ssd2
cannot add to 'tank': adding devices with different physical sector sizes is not allowed

This is because the existing zpool was created with 4k sector drives, causing ZFS to detect and set ashift = 12 (2^ashift = 4096), and new devices being added to the zpool must have consistent physical sector sizes.

Below are some pre-checks that should be done before continuing to add the SSD(s), and how to override the newly detected inconsistent ashift value.

1. Verify physical sector size of your drives:
   lsblk -do+LOG-SEC,PHY-SEC
   • 4kb sector drive with 512e enabled: LOG-SEC = 512, PHY-SEC = 4096
   • 4kb sector drive without 512e enabled: LOG-SEC = 4096, PHY-SEC = 4096
   • 4k/8k/16kb sector SSD with hardware 512e: LOG-SEC = 512, PHY-SEC = 512
   • 512b drive: LOG-SEC = 512, PHY-SEC = 512
2. Verify ashift value of zpool(s):
   zdb -C | grep "ashift\| name:"
   Smallest possible IO = 2^ashift
   • 4096: ashift = 12
   • 512: ashift = 9
3. Look at your SSD datasheet to confirm physical sector size ≥ 4096 (if you can't find this information, we will just have to assume it is a multiple of 4k)
4. Specify the same ashift value as the existing pool when adding the SSD(s):
   sudo zpool add -o ashift=12 tank log mirror ssd1 ssd2
5. Verify command succeeded:
   zpool list -v && zdb -C | grep "ashift\| name:"