• ODI DFP-34X-2C3 (SC/APC - preferred if you wish to re-use the fiber cable from M1)
• ODI DFP-34X-2C2 (SC/UPC - you will need to purchase an SC/APC (green connector, to FTP) ↔ SC/UPC (blue connector, to ONU) cable)

• Aliexpress - Fibershow Store
  • PON STICK EPON GPON XPON SFP ONU Stick With MAC PPPoE IPoE HGU SC Connector pon module 1490/1330nm 1.25Gbps 802.3ah Select Color: XPON APC for DFP-34X-2C3
  • The same store sells a Mini media converter that allows accessing the SFP GPON ONU without the incoming laser signal

• The configuration below is valid for M114_sfp_ODI_hybrid_220527

1. telnet 192.168.1.1 (admin:admin)
2. Set the required OMCI parameters for M1 OLT authentication
   • flash set GPON_ONU_MODEL HG8240H5
   • flash set GPON_SN HWTCXXXXXXXX
   • flash set OMCI_OLT_MODE 1
   • flash set PON_VENDOR_ID HWTC
3. reboot

1. http://192.168.1.1/admin/login.asp
2. WAN → PON WAN
3. Delete default WAN bridge
4. You should be able to get a DHCP WAN/WAN6 lease from M1 after this step

If your LAN subnet is different from 192.168.1.1, you can add an additional IP and NAT masquerade to WAN to be able to access your ONU from behind your router.

1. Configure an additional IP 192.168.1.253/24 on WAN
2. Configure NAT for destination 192.168.1.0/24, action = masquerade
3. You should be able to access the ONU at 192.168.1.1 from your LAN now